How to Hang a Full-Length Mirror Without Damaging Walls

By Timeless Furniture, Lighting & Homeware | Rowen & Wren | Published: 2026-10-23

Category: How-to Guides

Learn how to securely hang a full-length mirror like the Oliver Oak Mirror without leaving holes or marks on your walls.

Quick answer

Use adhesive mirror clips or heavy-duty command strips rated for the mirror's weight to hang a full-length mirror securely without drilling or damaging the wall.

Why wall damage matters

Renting, living in a listed building, or simply wanting to keep your walls pristine means every hole counts. A full-length mirror is heavy and awkward, so the wrong fixing can lead to a cracked mirror or a wall scar that needs repainting. The Oliver Oak Mirror, for example, is a solid oak framed piece with a bevelled glass edge, so its weight requires a method that holds securely without compromising the wall surface.

Choosing the right no-damage fixings

Not all no-damage fixings are equal. Adhesive mirror clips distribute weight across a larger surface and are designed specifically for mirrors. Heavy-duty command strips work well on smooth, clean walls but may struggle on textured surfaces. Always check the weight rating of the product against your mirror's actual weight. For the Oliver Oak Mirror, a pair of high-weight-rated adhesive clips or multiple command strips are appropriate.

Step-by-step: Hang a full-length mirror without wall damage

1. Weigh your mirror: Place the mirror on a bathroom scale to get its exact weight. Record this number. Common mistake: guessing the weight. A solid oak frame like the Oliver Oak Mirror is heavier than it looks.
2. Select fixings rated for that weight: Choose adhesive mirror clips or heavy-duty command strips with a weight rating at least 1.5 times the mirror's weight. For a full-length mirror, use at least two clips or four strips. Check the wall surface: smooth painted walls work best; textured or wallpaper may require different fixings.
3. Mark the position and level: Use a pencil to lightly mark the top edge of the mirror on the wall. Place a spirit level on the marks to ensure it is straight. Common mistake: assuming the floor is level. Always use a spirit level, not the floor or ceiling.
4. Apply fixings to the mirror: Clean the back of the mirror frame with isopropyl alcohol. Apply the adhesive clips or strips according to the manufacturer's instructions, pressing firmly for the specified time. Do not touch the adhesive after removing the backing – oils from your skin reduce grip.
5. Mount the mirror on the wall: Align the mirror with your pencil marks and press it firmly against the wall for 30 seconds. Hold it in place with a temporary support (like a stack of books) if needed while the adhesive cures. Wait at least 24 hours before adjusting or moving the mirror to allow the adhesive to reach full strength.
6. Test the hold: Gently try to slide the mirror sideways. If it moves, the adhesive has not bonded correctly – remove and reapply with fresh fixings. If the mirror feels loose after 24 hours, the fixings are under-rated or the wall surface is unsuitable. Switch to a different method.

Product facts

Oliver Oak Mirror, Full Length: A classic full-length antique-inspired solid oak framed mirror with a delicately bevelled glass edge. The solid oak frame adds significant weight, so you must use fixings rated for heavy mirrors to avoid wall damage or a fall.
Oliver Oak Mirror, Full Length